Pressing Instructions

HEAT PRESS

Temp: 320°F to 350°F  I Pressure: Heavy
Time: 7-10 seconds I Peel: COLD

REPRESS: Cover the image with Teflon or parchment sheet and repress for 2 seconds under firm pressure.

CRICUT EASY PRESS (not recommended)

Temp: 340°-350° I Pressure: Heavy
Time: 30-40 seconds | Peel: COLD
COVER WITH TRANSFER WITH TEFLON OR PARCHMENT PAPER BEFORE PRESSING

REPRESS: Cover the image with Teflon or parchment sheet and repress for 2-5 seconds under firm pressure.

Care Instructions: Turn the garment inside out. Machine wash cold. No bleach. No softener. Do not dry clean or iron. Tumble dry low.

________

HEAT PRESS
Temp: 320°F -350°F I Pressure: Heavy (Use body weight)
Time: 7-10 seconds I Peel: HOT PEEL (Immediately peel transfer when heat is removed)

CRICUT EASY PRESS
Temp: 350°F I Pressure: Heavy
Time: 30-40 seconds | Peel: HOT PEEL (IMMEDIATELY)

Heat press is recommended. These transfers will work with an iron or Cricut easy press however we are not responsible if your transfers were damages after using an iron/cricut easy press.

________

1. Prior to usage, apply the squeegee wrap to both the front and back surfaces.

2. Ensure the glass/plastic is free from hand oils (Avoid using alcohol, as our wraps are not alcohol-friendly).

3. Remove the design film transfer by peeling it off.

4. Align the design film with the glass/plastic cup and lay it down (Note: The adhesive is highly potent, making it impossible to remove once it touches the surface).

5. Use the squeegee to press the film down, starting from the center and moving outward to eliminate any bubbles.

6. Rub the applied film thoroughly for optimal results.

7. Slowly and carefully peel off the clear film to complete the process.

________

HEAT PRESS
Temp: 320°F -350°F I Pressure: Heavy

1. Place patch design on apparel.
2. Put parchment on top of design.
3. Press for 15 seconds.
4. Flip apparel inside out.
5. Press for another 15 seconds.

Heat press is recommended

HEAT PRESS
Temp: 355 | Pressure: Heavy
Heat Press Time: 180 seconds
Peel: COLD

Pressed at a firm pressure for 180 seconds (3 minutes) at 180c / 355F. This can differ from mug to mug and it is always advised to check with the manufacturer or supplier of your sublimation mugs first.